(C.T.) COCR TOOLS

CT.TTN.T4.20.6.120.50.J.R0*

2mm 4-Candela Torus Fresa in metallo duro per CoCr
Rivestimento FLATCOAT® TTN, Diametro dell’albero di 6mm, Nessun anello.
HS Code: 82077010
Numero dell’articolo originale di AlienTools: TCT.TTN.20.6.12.50.R0
Rimisurato a 1 micron per una finitura di alta precisione (utensile non progettato per la sgrossatura)

Magazzino UE in Magazzino: Disponibile (1-2 giorni lavorativi)

COD: CT.TTN.T4.20.6.120.50.J.R0* Categorie: (C.T.) Frese CoCr, Frese Datron, Frese MB Maschinen Tag: CT, MP, SB6R0CT Marchio: AlienTools

Coating Type (CT)

FLATCOAT® TTN Revêtement en titane

Shank Diameter (SD)

6mm

Cutting Diameter (CD)

2.0mm

Overall Length (OL)

50mm

Reach Length (RL)

12mm

Flute Length (FL)

2.0mm

Neck Diameter (ND)

1.95mm

Ring Type

Non anneau

Machine Model

Charly Dental CD 50*, Datron D5*, DMG Mori Ultrasonic*, Röders*, Wissner GAMMA 202*

Milling Material

CoCr

Cutting Geometry (CG)

Torique

Special Tool Indication

Finition, spécial

Flutes

Sample Box

Corner Radius (CR)

0.20mm

The CT Series is purpose-built for the dental industry, specially developed for high-precision milling of cobalt-chrome (CoCr) alloys. This series delivers reliable performance in one of the most demanding dental materials on the market.

PREMIUM CARBIDE, 100% QUALITY CONTROL CHECK

Each CT tool is made from ultra-fine grain premium carbide and goes through 100% inspection—every flute, every edge, every tool. Why? Because in dental milling, there's no margin for error. This strict quality control ensures each tool meets exacting standards, resulting in dependable performance, tighter tolerances, and smoother finishes in every restoration.

FLATCOAT® TTN COATING

Our FlatCoat® TTN multilayer coating is engineered for metals like CoCr. This titanium-tough nanocoating reduces friction, heat buildup, and wear—extending tool life dramatically. Unlike basic TiN coatings, FlatCoat® TTN delivers advanced layer adhesion and thermal stability, letting you push your milling speeds and still get precise, clean results.

CLEANER MILLING RESULTS, LONGER LIFETIMES #MILLMOREUNITS

With precision-ground carbide, full tool inspection, and our FlatCoat® TTN coating working in tandem, the CT Series stands up to the rigors of CoCr milling. You'll benefit from reduced tool changes, better marginal integrity, and repeatable quality in every dental unit milled.

Our measurement protocol is a premium quality assurance service available for select high-end tools. After machining, each tool is individually measured and documented for its exact dimensions. This data is printed on a dedicated label affixed to the tool's packaging, so you have precise specs in-hand—literally. No guesswork, just exact numbers you can rely on when precision is critical.

DIAMETER AND RUNOUT MEASURED TO ONE MICRON

Both diameter and concentricity (runout) are measured with a precision of 1 micron—that's 0.001 mm. For comparison, the average human hair is about 70 microns thick, so we're dealing with measurements at the edge of visibility. These two values—diameter and concentricity—are then combined to determine the tool's effective diameter.

RunoutExplainer2 — Why is this crucial? Because it's the effective diameter that defines the actual cut the tool will make in your material. Without this data, your CAM software is only guessing. With it, you get exact compensation, tighter tolerances, and more reliable, high-precision results.

ULTIMATE PRECISION FOR THE JOBS THAT REQUIRE IT

When every micron matters, this protocol gives you the edge. By combining real tool data with your digital workflow, you gain total control over toolpath accuracy—ideal for dental implant components, aerospace-grade parts, or any application where absolute precision is a must. It's not just a tool—it's calibrated confidence.