-
(N.T.) NON-FERROUS TOOLS
NT.UNC.B2.02.4.015.50.X
Original price was: €87,99.€73,30Current price is: €73,30.0.2mm 2-Flute Ball-Nosed Carbide End Mill for Non-Ferrous Metals/Abrasive Plastics No Coating, Reach: 1.5mm Shaft: 4mm. 0.2mm 2-Flute Ball Carbide End Mill for Non-Ferrous No Coating, Shaft Diameter of 4mm. HS Code: 82077010
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.600.100.M.INV*
Original price was: €151,99.€126,10Current price is: €126,10.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 60.0mm Radius: 0.50mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.450.100.M.INV*
Original price was: €151,99.€126,10Current price is: €126,10.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 45.0mm Radius: 0.50mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. Invader Series: DUAL-USE VERSION Remeasured to 1 Micron HS Code: 82077010
Add to cartEU Warehouse Inventory: In Stock (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.200.60.M.INV*
Original price was: €142,99.€118,40Current price is: €118,40.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 20.0mm Radius: 0.50mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.600.100.K.INV*
Original price was: €151,99.€126,10Current price is: €126,10.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 60.0mm Radius: 0.30mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.450.100.K.INV*
Original price was: €151,99.€126,10Current price is: €126,10.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 45.0mm Radius: 0.30mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.300.60.K.INV*
Original price was: €142,99.€118,40Current price is: €118,40.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 30.0mm Radius: 0.30mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.200.60.K.INV*
Original price was: €142,99.€118,40Current price is: €118,40.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 20.0mm Radius: 0.30mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.600.100.J.INV*
Original price was: €151,99.€126,10Current price is: €126,10.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 60.0mm Radius: 0.20mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.450.100.J.INV*
Original price was: €151,99.€126,10Current price is: €126,10.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 45.0mm Radius: 0.20mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.300.60.J.INV*
Original price was: €142,99.€118,40Current price is: €118,40.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 30.0mm Radius: 0.20mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Add to cartEU Warehouse Inventory: In Stock (1-2 business days) -
DUAL-USE
GT.DIA.T3.60.6.200.60.J.INV*
Original price was: €142,99.€118,40Current price is: €118,40.6.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 20.0mm Radius: 0.20mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 6mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.50.6.500.80.M.INV*
Original price was: €151,99.€126,10Current price is: €126,10.5.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 50.0mm Radius: 0.50mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 5mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.50.6.400.80.M.INV*
Original price was: €151,99.€126,10Current price is: €126,10.5.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 40.0mm Radius: 0.50mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 5mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.50.6.300.60.M.INV*
Original price was: €142,99.€118,40Current price is: €118,40.5.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 30.0mm Radius: 0.50mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 5mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days) -
DUAL-USE
GT.DIA.T3.50.6.200.60.M.INV*
Original price was: €142,99.€118,40Current price is: €118,40.5.0mm 3-Flute Corner Radius (Toric, Bull-Nosed) Carbide End Mill for Graphite FLATCOAT® DIA Coating, Reach: 20.0mm Radius: 0.50mm Shaft: 6mm. Invader Series: Rough+Finish Design With Measurement Protocol 5mm 3-Flute Torus Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series: DUAL-USE VERSION Remeasured to 1 Micron
Read moreEU Warehouse Inventory: On Backorder (1-2 business days)