Showing 1–12 of 563 results

(G.T.) Graphite Tools

GT.DIA.B2.30.6.180.60.X.INV*

87,30

Plus 19% VAT

3mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series Remeasured to 1 Micron

GT.DIA.B2.30.6.180.60.X.INV* ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.06.4.090.60.X.INV*

71,40

Plus 19% VAT

0.6mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 4mm. HS Code: 82077010 Invader Series Remeasured to 1 Micron

GT.DIA.B2.06.4.090.60.X.INV* ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.04.4.040.40.X.INV*

82,00

Plus 19% VAT

0.4mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 4mm. HS Code: 82077010 Invader Series Remeasured to 1 Micron

GT.DIA.B2.04.4.040.40.X.INV* ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.06.4.110.60.X

68,30

Plus 19% VAT

0.6mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 4mm. HS Code: 82077010

GT.DIA.B2.06.4.110.60.X ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.15.4.150.60.X.INV*

68,80

Plus 19% VAT

1.5mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 4mm. HS Code: 82077010 Invader Series Remeasured to 1 Micron

GT.DIA.B2.15.4.150.60.X.INV* ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.30.6.300.70.X.INV*

87,30

Plus 19% VAT

3mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series Remeasured to 1 Micron

GT.DIA.B2.30.6.300.70.X.INV* ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.15.4.200.60.X.INV*

68,80

Plus 19% VAT

1.5mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 4mm. HS Code: 82077010 Invader Series Remeasured to 1 Micron

GT.DIA.B2.15.4.200.60.X.INV* ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.30.6.450.100.X

95,70

Plus 19% VAT

3mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010

GT.DIA.B2.30.6.450.100.X ADD TO A COMPARISON TABLE

(N.T.) Non-Ferrous Tools

NT.UNC.B2.10.4.150.50.X

57,10

Plus 19% VAT

1mm 2-Flute Ball Carbide End Mill for Non-Ferrous No Coating, Shaft Diameter of 4mm. HS Code: 82077010

NT.UNC.B2.10.4.150.50.X ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.60.6.450.80.X.INV*

107,00

Plus 19% VAT

6mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010 Invader Series Remeasured to 1 Micron

GT.DIA.B2.60.6.450.80.X.INV* ADD TO A COMPARISON TABLE

(G.T.) Graphite Tools

GT.DIA.B2.60.6.600.100.X

95,70

Plus 19% VAT

6mm 2-Flute Ball Carbide End Mill for Graphite FLATCOAT® DIA Coating, Shaft Diameter of 6mm. HS Code: 82077010

GT.DIA.B2.60.6.600.100.X ADD TO A COMPARISON TABLE

(S.T.) Steel Tools

ST.TTN.F4.80.8.000.60.X.HRC

132,60

Plus 19% VAT

8mm 4-Flute Flat Carbide End Mill for Steel FLATCOAT® TTN Coating, Shaft Diameter of 8mm. HS Code: 82077010

ST.TTN.F4.80.8.000.60.X.HRC ADD TO A COMPARISON TABLE